Translucent Fine Particle Glass Ionomer Luting Cement: Crysta Luting | Prevest Denpro

Translucent Fine Particle Glass Ionomer Luting Cement: Crysta Luting | Prevest Denpro

Crysta Luting Product Description:

Crysta Luting is the ideal radiopaque, self curing translucent, particle glass ionomer luting material with excellent tooth adhesion, high fluoride release and flowability. It is useful for a wide range of clinical applications. Crysta luting is available as powder and liquid kit in a universal light yellow shade.

Crysta Luting Composition:

Powder: Fluoro Alumina Silicate Glass Powder.
Liquid: Polyacrylic Acid Liquid (Thin Viscosity)

Crysta Luting Intended Purpose/Intended Use

It is intended to be used for cementation of indirect restorations and attachment of orthodontic bands.

Crysta Luting Indications for Use:

1) Cementation of metal-based inlays, onlays crowns and bridges.
2) Cementation of high strength (Zirconia based) all ceramic crowns and bridges.
3) Cementation of stainless steel Crowns.
4) Attachment of metal orthodontic bands.

Crysta Luting Instructions For Use:

Powder/Liquid ratio (0.19/0.12), Mixing time (min. sec) : 45-60 seconds, setting time (min. sec) : 2min 30sec,
(at 23±1°C from start of mixing) Final finishing commencing time (after seating the restoration) : 5 min.

A. Tooth Preparation:

1. Prepare tooth in usual manner.
2. Clean the prepared teeth with pumice and water.
3. Rinse thoroughly with water. Remove excess moisture by blotting with a cotton pellet or gently blowing with
an oil free air.

DO NOT DESICCATE. Prepared surfaces should appear moist (glistering)

B. Restoration Preparation:

1) Make sure that the restoration is pretreated and handled according to the manufacturer’s instructions.

C. Powder and Liquid Dispensing:

1) The standard powder to liquid ratio is 0.19/0.12 (1level scoop of powder to 2 drops of liquid.)
2) For accurate dispensing of powder lightly tap the bottle against the hand. Do not shake or invert.
3) Hold the liquid bottle vertically and squeeze gently.
4) Close bottle immediately after use.

D. MIXING:

Dispense Powder and Liquid onto the pad. Using the plastic spatula, add all the powder to the liquid. Mix rapidly for 45-60 seconds.

NOTE: When mixing larger amounts, divide the powder into two equal parts. Mix the first portion with all of
liquid for 15 seconds. Incorporate the remaining portion & mix the whole thoroughly for 45 seconds (Total 60
seconds).

E. APPLICATIONS:

IMMEDIATELY apply (within 1 minute after dispensing) to the surfaces to be coated using a micro applicators, DO NOT AIR BLOW.

NOTE: Should the coated surfaces be contaminated with water, blood or saliva, wash and dry the surface and
repeat the coating procedure.

F. CEMENTATION:

1) Coat the internal surface of the restoration with sufficient cement and seat immediately. The working time is
2 minutes from start of mixing at 23±1°C (73.40±1°F). Higher temperature shortens working time.
2) Maintain moderate pressure.
3) Start removing excess cement when it feels rubbery.
4) Finishing can be started 4 minutes 30 seconds after seating the restoration.
The dispensed material shall not be placed back in container and the dose once applied and used shall not be
reused.

Crysta Luting Warning:

Remainings of other substances like isolating agent may affect adhesion and should be removed completely
before using crysta luting for final cementation. Avoid prolonged or repeated contact with skin (allergic contact
dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally contact with the skin may cause irritation, burns or hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue the use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.

Crysta Luting Precautions:

1) In case of contact with oral tissue or skin, remove immediately with a sponge or cotton soaked in alcohol. Flush with water. To avoid contact, a rubber dam and/or local butter can be used to isolate the operation field from the skin or oral tissue.
2) In case of contact with eyes flush immediately with water and seek medical attention.
3) DO NOT mix powder or liquid with component of other glass ionomer cements.
4)This product is not indicated for filling or core buildup.

Crysta Luting Contraindications:

1) Crysta Luting should not be used if the patient is known to be allergic to any of the ingredient used.
2) Do not apply the material directly onto areas near the pulp or on to the exposed pulp as irritation may occur.

Crysta Luting Storage Conditions:

Store at temperature between 10°C(50°F) to 24°C(75°F). Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

Crysta Luting Shelf Life:

3 Years from the date of manufacturing.

Crysta Luting Net Content:

Powder 15g, Liquid 10ml, 1x Spoon, 1 x Mixing Pad

To see our full range of products: Click Here

To buy Translucent Fine Particle Glass Ionomer Luting Cement: Crysta Luting : Click Here

Related Keyword: pistol4d Crysta Luting, Crysta Luting Benefits, Crysta Luting Indications, Crysta Luting Instructions, Crysta Luting Precautions, Crysta Luting price, Buy Crysta Luting online, Crysta Luting rate, Crysta Luting prevest denpro